Award
winning
canal holiday boat hire...
Discover Britain in
style
with carefree boating ...
|
Award
winning |
|
Discover Britain in
style |
THE FITTING OUT OF
CARLTON - WATER SYSTEM PIPEWORK
Links to other pages on the fitting
out of CARLTON
| WATER
SYSTEM PIPEWORK Carlton was delivered with the hull already primed and the bottom blacked. |
 |
 |
The
first three images are of the pipework on the right hand side of the boat
looking to the front of the boat from the back. The larger thicker pipes are the cental heating "ring" that will eventually go from and return to the central heating boiler. The radiators will feed from and return to this "ring". |
 |
|
 |
This image shows where the central heating boiler will be placed, connections have already been fitted and covered with black tape to prevent dust and rubbish getting in to the system. |
| Although this image is looking to the rear of the boat, this image and the following image show the pipework on the left hand side of the boat looking to the front of the boat from the back. |  |
| The torch is illuminating the water tank underneath the bow deck, where fresh water will be drawn from for washing and cooking purposes. |  |
| Apparently
some call it a regulator, others an accumulator, to me it is a big round
red ball. But I am told it provides instant supply of water to the taps and shower when they are switched on, without it there would be a delay for the water pump to supply water to the particular unit. You can also see the stainless steel water tank (better shown in earlier photographs) and the water pump, to the right of the "ball". |
 |
| Ashby
Boat Company, Canal Wharf, Stoke Golding, NUNEATON, Warwickshire CV13 6EY |
Tel.
01455 212671 Fax. 01455 213 255 Email - sales@ashbyboats.co.uk |
